We use a trusted and high quality polish which allows us to remove very light swirls and scratches by hand. This helps to increase the clarity of the paint and leaves a deep shine.

A glaze is applied in a similar way to polish but it's purpose is to hide light to medium scratches and swirls to give your paint work some depth and a deep gloss.

This is an all in one hydrophobic paint sealant. It will go over anything; paint, glass, wheels...etc. This will seal in everything it touches so it is advised to at least glaze before applying for best results. It will usually last 3-6 months.

This is applied directly to your paint work and is left to cure for a few mintues before buffing away. This will make water "jump" from the surface and should last at least 12 months with correct maintenance.

We first prepare your glass with a claybar to remove deep surface contaminants. A coating of glass sealant is then applied to all exterior windows. It is that good that you can drive without your wipers on in the rain above 50MPH!

The wheels get a good decontamintion first with a fallout remover to remove baked on iron dust from your brakes. This bleeds purple which shows the chemical reaction working. We use a PH neutral fallout remover as this is the safest way to protect your wheels. After a good clean, we apply a wax that is formulated to withstand high temperatures. This stops the wax breaking down prematurely. A premium gloss tyre shine is then applied to set your wheels off.

Not only does a good wax offer protection, but it also enchances gloss levels. We recommend a wax coating after any polish or sealant to get the most from your extras. This will help to  protect the hard work gone in to making your car look good and will lead to better results from multiple maintenance washes.

Lighter coloured seats are more prone to staining from jeans and dirt. A deep clean will help to lift stains and restore the original colour. A leather feed is applied to condition and soften the seats to help keep them healthy. We then apply a leather guard to help minimise further staining.

We start by vacuuming loose dirt from all surfaces. We then apply a fabric cleaner and work it in with a soft brush to help remove stains and dirt. We then wet vac the area to lift the dirt out from deep in the seats and carpet.